Linear Solenoids - Heavy Duty

Square-design linear solenoids with a fully enclosed coil provide maximum protection because of their encapsulated coil construction and produce significantly more force than open-frame designs.

Encapsulated solenoids are useful for high-power applications; the coil is protected and suited to arduous or exposed conditions where other solenoid designs would otherwise deteriorate, ultimately leading to failure.

V series solenoids come with a double shaft offering connectivity to either end of the solenoid, providing a push force or a pull force in one direction when energised. The push side of the shaft is threaded; the pull side is a clevis-type connection.

A mechanical solution to return the shaft, for example, an externally mounted spring, gravity, or part of the automated process, is required to return the plunger to a home position.

V series solenoids are surface mounted. Threaded holes on the underside of the solenoid are provided to secure the device to a flat surface.

Standard voltages are 24V DC, 100% ED rated with flying leads or a plug connection; other voltages or alternative duty cycles for increased force are available upon request.

Downloads

8mm Push and Pull Type V30 Solenoid 1.3MB
15mm Push and Pull Type V45 Solenoid 1.3MB
20mm Push and Pull Type V65 Solenoid 1.4MB

Part Numbers Show…

V30
V45
V65